Showing 1–12 of 27 results

  • 449.99

    DJI N3 Naza Flight Controller and GPS

    DJI N3 Naza Flight controller The latest in the Naza flight controller series, the DJI N3 is perfect for both hobby and industrial applications. The DJI N3 flight controller is compatible with a variety of DJI hardware and software solutions such as the Lightbridge 2, DJI GO, Datalink PRo, iOSD or DJI Intelligent ESC. It […]

  • 1,041.30

    DJI Lightbridge 2 Radio Control and Video Downlink

    Travel Further & See More Clearly The Lightbridge 2 has pushed the boundaries of digital video downlinks. Lightweight and compact, this system has a huge 2km transmission range and doesn’t suffer from the interference issues of analogue systems. The Lightbridge 2 is a radio control and video downlink system all-in-one.  The package includes the latest […]

  • 1,078.56

    DJI A3 Flight Controller

    DJI A3 – Reliable and Accurate Flight Control The most advanced DJI flight controller yet, the DJI A3 has been designed for professional and industrial applications, where reliability and the ability to customise are essential. This flight controller, designed for DJI’s professional frames such as the DJI Matrice 600, uses multi-sensor fusion algorithms to improve […]

  • 17.40

    Single rod FPV monitor mounting bracket

    This is good and strong solution for those who does not use the transmitter board with monitor bracket and cannot use the two rods mounting bracket. This solution is suitable for every transmitter, wich has center mount for neck strap.

  • 258.60

    Vulcan DayBright Navigation LED (S)

    The Vulcan DayBright LEDs system consists of four LED modules designed to fit between the motor mount plates of our standard and extended motor mounts. Each unit includes two 1.5W super bright LEDs behind diffuser material for the best light spread. Each set consists of two green (starboard – right) and two red (port – left) LED modules. The set also […]

  • 232.20

    Vulcan DayBright Navigation LED (L)

    DayBright Navigation LED System for large motor mounts The Vulcan DayBright LEDs system consists of four LED modules designed to fit between the plates of our larger motor mounts. Each unit includes a 1.5W super bright LED behind diffuser material for the best light spread. Each set consists of one green (starboard – right), one […]

  • 631.08

    Futaba T14SG 2.4GHZ Transmitter

    The best transmitter! True workhorse. The Futaba 14-Channel 2.4GHz Combo with R7008SB Receiver The Futaba 14SG is perfect for any pilot looking for a flexible and feature-packed transmitter with 2.4GHz FASSTest technology. The Futaba 14SG is compatible with Futaba FASST and S-FHSS protocols so will work with many receivers. The 14SG is capable of transmitting […]

  • 17.40

    VULCAN MultiFrame – High Clearance Landing Leg 350mm

    High Clearance Landing Leg – 350mm New, slightly longer version of the original high landing leg to give extra ground clearance. Made from black anodized folded aluminium strip, the MultiFrame High Clearance landing leg is pre drilled to allow it to be fitted to any position on any MultiFrame arm. The leg is very strrong […]

  • 15.12

    VULCAN MultiFrame – Carbon Fibre Motor Mount

    Vulcan MultiFrame Motor Mount Made from high grade Carbon Fibre, the MultiFrame motor mount bolts straight onto the top or bottom of the arm as you choose. It has pre cut slots to allow mounting of almost any multirotor motor, as well as the use of standoff pillars to create an over and under dual […]

  • 19.50

    VULCAN MultiFrame – 440mm Multicopter Arm

    Vulcan MultiFrame 440mm Multicopter arm The MultiFrame long arm is made from high grade black anodized custom box section Aluminium. It is pre drilled at 30mm intervals to allow fitment to any arm position within the frame centre plate, as well as Carbon motor mounts. Being drilled down it’s entire length also means that should […]

  • 17.40

    VULCAN MultiFrame – 350mm Multicopter Arm

    Vulcan MultiFrame 350mm Multicopter arm The MultiFrame short arm is made from high grade black anodized custom box section Aluminium. It is pre drilled at 30mm intervals to allow fitment to any arm position within the frame centre plate, as well as Carbon motor mounts. Being drilled down it’s entire length also means that should […]