Näitan kõiki 5 tulemust

  • 704,28 

    Drone accessory|dji|lidar range finder|cp.rn.00000288.01

    DJI LiDAR Range Finder (RS)
    14m range and has a built-in camera with a 30mm-equivalent focal length and 70° FOV. Enables autofocus on manual lenses and enhances tracking.
    The LiDAR focusing system makes focusing easier for hand-held shooting, without relying on the surface texture of the subject. This is especially useful in low-light environments and results in exceptional focusing capabilities.
    The new LiDAR Range Finder (RS) can project 43,200 ranging points, detect within a 14-meter range, [1] and has a built-in camera with an equivalent focal length of 30 mm and a wide FOV of 70°, which can handle the focusing needs of most scenarios. Pairing with the new Focus Motor (2022) also makes autofocus on manual lenses possible after calibration.
    With the LiDAR Range Finder (RS), RS 3 Pro supports ActiveTrack Pro, delivering better subject identification and tracking performance.
    1. Tested in an environment without strong light. In normal shooting environments, the detection distance of human subjects is 7 meters.

  • 165,44 

    Drone accessory|dji|fpv flight battery|cp.fp.00000023.01

    DJI FPV Intelligent Flight Battery.

    The rated capacity for each battery is up to 44.4 Wh, supporting flight for up to approximately 20 minutes. The built-in intelligent battery management system monitors battery status in real time for a more worry-free flight.

  • 67,48 

    Action cam acc bike handlebar/mount cinstavg insta360

    Insta360 Third-Person Bike Handlebar Mount.

    Compatibility: Insta360 X3 / ONE RS / ONE X2 / ONE R / ONE X camera

  • 48,17 

    Action cam acc bike tail mount/cinstavh insta360

    Insta360 Third-Person Bike Tail Mount.

    Compatibility: Insta360 X3 / ONE RS / ONE X2 camera

  • 37,69 

    Action cam acc helmet mount/unicorn dinadjs/a insta360

    Unicorn Helmet Mount.

    The Unicorn Helmet Mount is suitable for action sports like bike riding and skiing. It is not suitable for skydiving, bungee jumping, wing-mounted flying and other high-speed aerial sports scenes where the mount can get caught in a parachute.

    Compatibility: X3, ONE RS (1-Inch 360 excluded), ONE X2, GO 2 (GO 2 must be assembled with the Carbon Fiber Extension, sold separately), ONE R, ONE X