DJI Matrice 4D Series 240W Charging Hub

Connect to three Matrice 4D Series Batteries simultaneously and charge them in sequence from high to low battery level.

The DJI Matrice 4D Series 240W Charging Hub can be used with the DJI 240W Power Adapter or DJI Power 1000 portable power stations and can connect to three Matrice 4D Series Batteries simultaneously and charge them in sequence from high to low battery level. The battery charging hub supports both Standard Mode and Ready-to-Fly Mode. Standard Mode charges each battery to 100% sequentially. Ready-to-Fly Mode charges each battery to 90% sequentially and maintains that level for quick use.

Compatible with the DJI High-Bright Remote Monitor and can provide power for DJI High-Bright Remote Monitors, CrystalSky monitors, Cendence remote controllers, and DJI FPV remote controllers. This 2S 4920 mAh battery has excellent discharge performance at low temperatures and charges quickly. One WB37 Battery offers approx. 2 hours of operating time for the DJI High-Bright Remote Monitor, seven and half hours of operating time for the DJI FPV remote controller, four to five hours of operating time for a 7.85″ CrystalSky monitor, five to six hours for a 5.5″ CrystalSky monitor, and four hours for a Cendence remote controller.

DJI Air 3 Battery Charging Hub.

The battery charging hub supports a new power accumulation function, which can transfer the remaining power from multiple batteries to the battery with the highest remaining power. When connected to a designated charger, the battery charging hub can expand the charging interface to three, and enhances efficiency by charging batteries in sequence according to their remaining power level, with more fully-charged batteries receiving power first. The battery charging hub can also quickly charge remote controllers, smartphones, and other devices.

DJI Power Car Power Outlet to SDC Power Cable (12V/24V)

Connects a car power outlet to the SDC or SDC Lite port on DJI Power-series power stations to recharge Power 500/1000 once the vehicle starts.

To connect car power outlet to SDC or SDC Lite port on a DJI Power-series power station for charging the latter after the car starts.

The accessory described comes in two parts: one XT60 to SDC Module, and one Car Power Outlet to XT60 Power Cable. The XT60 to SDC Module can also act as a solar panel adapter module (MPPT), suitable for connecting one Zignes 100W/120W Solar Panel.