Näitan tulemusi 1–12, kokku 48 tulemust

  • 358.73

    iCharger 4010 DUO 2x40A 2000W Dual Port

    Toode vajab eraldi toiteplokki

  • 298.80

    EFUEL 1200W/50A Power Supply

    Net weight 3.08kg Voltage 100-240V AC Input AC Frequency 50-60Hz Output Voltage 15-30V DC±0.5V Output Current 50A±1A Current Overload Protection ≤ 51A 500MS Input Fuse 20A Fuse LCD Display Voltage Precision ±0.3V Current Precision ±0.5A Output Voltage Ripple < 300mV Power Efficiency 89% Power Factor > 0.98 Over Temperature Protection <65℃ Cooling Method Cooling Fan […]

  • 297.60

    iCharger 406 Duo 1400W 40A 6S

    Powerfull 6S Charger. 1400W/40A This dual port charger with a color LCD screen allows charging different batteries up to 40A, or up to 70A in synchronous mode. iCharger 406 Duo is a little brother of the popular and extremely powerful iCharger 4010 Duo. Instead of charging 10S batteries up to 40A, iCharger 406 Duo can […]

  • 297.14

    FrSky Taranis X9D Plus Saatja + X8R Vastuvõtja + Kohver

    FrSky Taranis X9D The FrSky Taranis has been improved! The new Taranis X9D Plus is an open-source radio that has a factory built-in version of the very latest FrSky XJT 2.4G module – AND yet will additionally accommodate an external JR based module for Spektrum DSM-2 and DSM-X receivers as well as JR equipment. May come with travel case […]

  • 258.60

    Vulcan DayBright Navigation LED (S)

    The Vulcan DayBright LEDs system consists of four LED modules designed to fit between the motor mount plates of our standard and extended motor mounts. Each unit includes two 1.5W super bright LEDs behind diffuser material for the best light spread. Each set consists of two green (starboard – right) and two red (port – left) LED modules. The set also […]

  • 232.20

    Vulcan DayBright Navigation LED (L)

    DayBright Navigation LED System for large motor mounts The Vulcan DayBright LEDs system consists of four LED modules designed to fit between the plates of our larger motor mounts. Each unit includes a 1.5W super bright LED behind diffuser material for the best light spread. Each set consists of one green (starboard – right), one […]

  • 226.80

    EFuel 30A Power Supply

    30A Switching Power Supply Your eFUEL switching DC Power Supply is designed to use household AC power source to power equipments that required DC power. The eFUEL converts standard household power 110-120V AC or 200-240V AC to 9-18V DC power and can supply up to 30 amperes of continuous power. If you are R/C hobbyist, […]

  • 219.00

    DJI iOSD MARK II

    The iOSD is a video superposition system that designed for FPV flight by DJI. Platform Support WooKong-M Currently Size 52 mm x 41 mm x 11 mm Weight 56g Video Input/Output Mode PAL/NTSC Electrical Characteristics Voltage:3S-6S Current(Typical Value):60mA@52.2V, 103mA@12.6V Rated Power:1.25W Operating Temperature -20°C to +60°C Functions iOSD Information Transmission Video Transmission, Two Video Signal […]

  • 202.80

    Standard Set of the CAMremote-3w (2.4 GHz Wifi version)

    Standard Set of the CAMremote-3w (2.4 GHz Wifi version) CAMremote-3w is used to remote control all cameras* which have built in Wifi remote control support. It will create wireless bridge between CAMremote and camera so that remote control devices (like hobby radios etc) which are connected to CAMremote can control the camera. Common controllable features are […]

  • 118.80

    Standard Set of the CAMremote-3

    Standard Set of the CAMremote-3 Standard set of CAMremote contains the CAMremote-3 Controller, CR-PC USB Configuration Cable (USB A-type, 70cm/27.6″ or 13cm/5.1″) and 3 JR/Futaba-style Cables (with 3-pin female terminals, length 15cm/5.9″ – 2g/cable). Note – Standard Set does NOT contain cable for camera control, choose suitable cable below.  Enter camera model(s) to ‘Cameras’ field if you would like […]

  • 76.80

    CR-Camera Cable for RED Epic/Scarlet Cameras

    CR-Camera Cable for RED Epic/Scarlet cameras (4-pins plug, default length 30cm/11″ – 15g). Controls start/stop of movie recording. Will support more remote controllable features by using RED Communication Protocol (this will be available in near future by firmware update).