-
Drone accessory|dji|m2ea rtk module|cp.en.00000335.01
M2EA RTK Module
-
Drone accessory|dji|lidar range finder|cp.rn.00000288.01
DJI LiDAR Range Finder (RS)
14m range and has a built-in camera with a 30mm-equivalent focal length and 70° FOV. Enables autofocus on manual lenses and enhances tracking.
The LiDAR focusing system makes focusing easier for hand-held shooting, without relying on the surface texture of the subject. This is especially useful in low-light environments and results in exceptional focusing capabilities.
The new LiDAR Range Finder (RS) can project 43,200 ranging points, detect within a 14-meter range, [1] and has a built-in camera with an equivalent focal length of 30 mm and a wide FOV of 70°, which can handle the focusing needs of most scenarios. Pairing with the new Focus Motor (2022) also makes autofocus on manual lenses possible after calibration.
With the LiDAR Range Finder (RS), RS 3 Pro supports ActiveTrack Pro, delivering better subject identification and tracking performance.
1. Tested in an environment without strong light. In normal shooting environments, the detection distance of human subjects is 7 meters. -
DJI Mavic 3 ND Filters Set (ND4/8/16/32)
DJI Mavic 3 ND Filters Set (ND4/8/16/32).
-
Action cam acc charging/station pro cinpbtc/a insta360
Pro Charging Station.
-
Drone acc mavic 3 nd filters/set cp.ma.00000430.01 dji
DJI Mavic 3 ND Filters Set (ND64/128/256/512
-
Body camera mount molle/tw1101 02127-001 axis
AXIS TW1101 Molle Mount from the angle left
For sturdy connection on MOLLE webbing
-
Action cam acc dive case /go 3/cinsbbkn insta360
Insta360 GO 3 Dive Case
– Waterproof to 60m (197ft) with the Dive Case.
– Glass lenses for better image quality.
– Sliding buckle design keeps the camera safe and secure.
-
Camera acc r focus wheel/cp.rn.00000008.01 dji
DJI R Focus Wheel.
When paired with the DJI Ronin Focus Motor, it can control the focus, iris, and zoom.
Compatibility:
DJI RS 3 Pro
DJI RS 2
Ronin-SC
Ronin-S
-
Drone acc mini 3 pro two way/char hub cp.ma.00000500.01 dji
DJI Mini 3 Pro Two-Way Charging Hub
The Two-Way Charging Hub can charge the remote controller and three batteries in sequence. It can also be used as a mobile power source. -
Power bank usb 5000mah/nano a1653h11 anker
Nano Power Bank 5000mAh, 22.5W, Built-In with USB-C Connector, Black.
-
Camera acc ronin grip tripod/cp.rn.00000007.01 dji
DJI Ronin-S Extended Grip/Tripod.
-
Camera acc cell2 battery/rechargeable frb20 imou
Rechargeable Battery for Cell 2
-
Action cam acc selfie stick/cinsphd/e insta360
Insta360 70cm Invisible Selfie Stick
Compatibility:ONE RS,GO 2,ONE X2,ONE R,ONE X
A perfect grip for selfies.
Auto-removed in 360 shots to give you unobstructed, impossible angles (Invisible Selfie Stick effect can only be achieved with 360 cameras).
Compatibility: GO 2, ONE X2, ONE R, ONE X.
-
Drone acc mavic air 2 battery/charger cp.ma.00000226.01 dji
The Mavic Air 2 Battery Charger has multiple output modes including 13.2 V and 5 V. Equipped with a charging port, USB-A interface, and micro USB interface, the Battery Charger can charge batteries and the remote controller at the same time, as well as serve as an external power source for other devices
A 38W total output power makes charging even faster. -
Dashcam acc hardware kit/midrive up03 70mai
70mai Hardwire Kit Type-C
To enable parking surveillance
– DC 12-30V Input Voltage
– 5V Output Voltage
– 2.4A Output Current
>>>> Only for M500 <<<<
• Fits for 24H Smart Parking Surveillance – 70mai Hardwire Kit UP03 enables 24H Smart Parking Surveillance for your 70mai dash cam. With ACC detection, your hardwired 70mai dash cam switches to parking surveillance mode automatically when your turn off the car engine, and switches back to normal recording when on
• Easy to Use & Power Supplying – The Kit UP03 is connected to car battery, it can also interruptedly supply power for 70mai dash cam for 24 hours, supplying power when the car is turned off
-
Drone accessory|dji|rc-n1 remote controller monitor hood|cp.ma.as000000.01
DJI RC-N1 Remote Controller Monitor Hood
-
Action cam acc hand grip/cintypj/a insta360
Floating Hand Grip
Compatibility:ONE RS,GO 2,ONE X2,ONE R,ONE X
– Floating non-slip hand grip for your water adventures.
– Compatible with GO 2 using the Action Mount Adapter.
– Dive case not included.